Inner Tracking System New

Schematics of new ITS

The main tasks of the ITS are to reconstruct the primary and secondary vertices, to track and identify charged particles with a low pt cutoff and to improve the momentum resolution at high pt.

The ITS used until the end of 2018, during LHC Run1 and Run2, consists of two layers of Silicon Pixel Detectors (SPD), two layers of Silicon Drift Detectors (SDD) and two outer layers of Silicon Strip Detectors (SSD).

Details can be found here

During the second LHC long shutdown (LS2, 2019-2021)  a new, ultra-light, high-resolution Inner Tracking System (ITS) was constructed.This is a key element of the ALICE upgrade during LS2. With respect to the one previously installed in ALICE, the new ITS will significantly improve the tracking precision, the tracking efficiency at low-transverse momenta and the readout rate capabilities. The new ITS consists of seven concentric detector layers based on a 50-μm thick CMOS pixel sensor, with a pixel pitch of about 30 x 30 μm2 for a total of about 12.5G pixels covering an active surface of about 10m2. A key feature of the new ITS is the very low mass of the three innermost layers, which have a material thickness of 0.3% X0 per layer. 

The countries that participate in the construction of the new ITS are: China, Czech Republic, France, Italy, Netherlands, Pakistan, Republic of Korea, Russia, Slovakia, Switzerland, Thailand, Ukraine, United Kingdom and the United States. 

More about Experiment Detectors